Flux publications Open Science

Mis à jour le

Aparecida Silva Lorraine, Espinosa Christine, Paroissien Eric, Lachaud Frédéric, Silva Lucas Filipe Martins da, Numerical model of the variability of particulate filled structural adhesive behaviour and failure in tension. 2022, 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2022), 05/06/2022 - 09/06/2022 (09/06/2022, Oslo)

Numerical model of the variability of particulate filled structural adhesive behaviour and failure in tension

Charlotte Miguel, Espinosa Christine, Salaün Michel, Schwartz Sébastien, Out-of-plane-bending modeling versus in-plane-membrane resistance of parachute tissues using a spring-mass-damper model. 2022, 26th AIAA Aerodynamic Decelerator Systems Technology Conference, 19/05/2022 - 16/05/2022 (16/05/2022, Toulouse)

Out-of-plane-bending modeling versus in-plane-membrane resistance of parachute tissues using a spring-mass-damper model

Aparecida Silva Lorraine, Espinosa Christine, Paroissien Eric, Lachaud Frédéric, Da Silva Lucas F.M., Numerical simulations of adhesive spreading during bonding-induced squeeze. 2021, The journal of Adhesion. ISSN 0021-8464

Numerical simulations of adhesive spreading during bonding-induced squeeze

Comellini Anthea, Le Ny Jerome, Zenou Emmanuel, Espinosa Christine, Dubanchet Vincent, Global Descriptors for Visual Pose Estimation of a Non-Cooperative Target in Space Rendezvous. 2021, IEEE Transactions on Aerospace and Electronic Systems. 57 (6). 4197-4212. ISSN 0018-9251

Global Descriptors for Visual Pose Estimation of a Non-Cooperative Target in Space Rendezvous

Comellini Anthea, Maye Florent, Dubanchet Vincent, Casu Davide, Zenou Emmanuel, Espinosa Christine, Robust Navigation Solution for Vision-Based Autonomous Rendezvous. 2021, 2021 IEEE Aerospace Conference, 2021-03-06 - 2021-03-13 (2021-03-13, Virtual)

Robust Navigation Solution for Vision-Based Autonomous Rendezvous

Comellini Anthea, Casu Davide, Zenou Emmanuel, Vincent Dubanchet, Espinosa Christine, Incorporating delayed and multi-rate measurements in navigation filter for autonomous space rendezvous. 2020, Journal of Guidance Control and Dynamics. 43 (6). 1164-1188. ISSN 1533-3884

Incorporating delayed and multi-rate measurements in navigation filter for autonomous space rendezvous

Comellini Anthea, Zenou Emmanuel, Espinosa Christine, Dubanchet Vincent, Vision-based navigation for autonomous space rendezvous with non-cooperative targets. 2020, The 11th International Conference on Information, Intelligence, Systems and Applications (IISA2020), 2020-07-15 - 2020-07-17 (2020-07-17, Piraeus)

Vision-based navigation for autonomous space rendezvous with non-cooperative targets

Ilyas Muhammad, Hussain Ghulam, Espinosa Christine, Failure and strain gradient analyses in incremental forming using GTN model. 2019, International Journal of Lightweight Materials and Manufacture. 2 (2). 177-185. ISSN 2588-8404

Failure and strain gradient analyses in incremental forming using GTN model

Aparecida Silva Lorraine, Espinosa Christine, Da Silva Lucas F.M., Paroissien Eric, Lachaud Frédéric, Numerical simulations of adhesive squeeze flow : A review. 2019, AB2019 5th International Conference on Structural Adhesive Bonding, 2019-07-11 - 2019-07-12 (2019-07-12, Porto)

Numerical simulations of adhesive squeeze flow: A review

Aparecida Silva Lorraine, Espinosa Christine, Da Silva Lucas F.M., Paroissien Eric, Lachaud Frédéric, Simulation of adhesive squeeze flow using smoothed particle hydrodynamics. 2019, CM4P - Eccomas Thematic Conference - Computational Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems, 2019-07-15 - 2019-07-17 (2019-07-17, Porto)

Simulation of adhesive squeeze flow using smoothed particle hydrodynamics

Aparecida Silva Lorraine, Da Silva Lucas F.M., Espinosa Christine, Paroissien Eric, Lachaud Frédéric, Sanches Leonardo, Simulating the squeeze flow of a technical adhesive to contribute to a demise design. 2019

Simulating the squeeze flow of a technical adhesive to contribute to a demise design

Bigand Audrey, Espinosa Christine, Bauchire Jean-Marc, Lightning surface explosion impact study on damage generation into composite. 2019, International Conference of Lightning and Static Electricity (ICOLSE2019), 2019-09-10 - 2019-09-13 (2019-09-13, Wichita)

Lightning surface explosion impact study on damage generation into composite

Bigand Audrey, Espinosa Christine, Bauchire Jean-Marc, Flourens Franck, Lachaud Frédéric, Lightning damage assessment into composite based on surface explosion and fiber breakage. 2019, 22nd International Conference On Composite Materials (ICCM22), 2019-08-11 - 2019-08-16 (2019-08-16, Merlbourne)

Lightning damage assessment into composite based on surface explosion and fiber breakage

Bigand Audrey, Bauchire Jean-Marc, Espinosa Christine, Rabat Hervé, Évaluation de la surpression générée par l’explosion électrique des protections foudre. 2019, 14ème Colloque sur les Arcs Electriques (CAE XIV), 2019-03-18 - 2019-03-19 (2019-03-19, Bourges)

Évaluation de la surpression générée par l'explosion électrique des protections foudre

Aparecida Silva Lorraine, Espinosa Christine, Silva Lucas Filipe Martins da, Paroissien Eric, Lachaud Frédéric, Simulation of adhesive squeeze flow using smoothed particle hydrodynamics. 2019, Computational Methods in Multi-Scale, Multi-Uncertainty and Multi-Physisc Problems, 15/07/2019 - 17/07/2019 (17/07/2019, Porto)

Simulation of adhesive squeeze flow using smoothed particle hydrodynamics

Aparecida Silva Lorraine, Espinosa Christine, Silva Lucas Filipe Martins da, Paroissien Eric, Lachaud Frédéric, Numerical simulations of adhesive squeeze flow : a review. 2019, 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 12/07/2019 - 11/07/2019 (11/07/2019, Porto)

Numerical simulations of adhesive squeeze flow: a review

Soulas Floriane, Espinosa Christine, Lachaud Frédéric, Guinard Stéphane, Lepetit Bruno, Revel Ivan, Duval Yohann, A method to replace lightning strike tests by ball impacts in the design process of lightweight composite aircraft panels. 2018, International Journal of Impact Engineering. 111. 165-176. ISSN 0734-743X

A method to replace lightning strike tests by ball impacts in the design process of lightweight composite aircraft panels

Al Hossen Iman, Espinosa Christine, Hor Anis, Pierré Estelle, Vilcoq Stéphane, Chieragatti Rémy, Montel Thomas, Gnangnon Oscar, Experimental investigation of the repeatability of direct damage induced by lightning strikes on metallic panels. 2018, 15th International High-Tech Plasma Processes Conference (HTPP15), 2018-07-02 - 2018-07-06 (2018-07-06, Toulouse)

Experimental investigation of the repeatability of direct damage induced by lightning strikes on metallic panels

Bigand Audrey, Espinosa Christine, Rabat Hervé, Bauchire Jean-Marc, Lightning strike protection explosion and overpressure profile. 2018, 15th International High-Tech Plasma Processes Conference (HTPP), 2018-07-02 - 2018-07-06 (2018-07-06, Toulouse)

Lightning strike protection explosion and overpressure profile

Bigand Audrey, Espinosa Christine, Bauchire Jean-Marc, Flourens Franck, Lachaud Frédéric, Estimation of the load produced by the electro-thermal behaviour of lightning strike protection layers on a composite panel. 2018, 18th European Conference on Composite Materials (ECCM18), 2018-06-24 - 2018-06-28 (2018-06-28, Athens)

Estimation of the load produced by the electro-thermal behaviour of lightning strike protection layers on a composite panel

Bauchire Jean-Marc, Lisnyak M., Rabat Hervé, Chnani M., Bigand Audrey, Espinosa Christine, Numerical and experimental study of arc fault in aeronautical conditions. 2018

Numerical and experimental study of arc fault in aeronautical conditions

Bigand Audrey, Bauchire Jean-Marc, Espinosa Christine, Lightning arc interaction with complex structure. 2018, 15th International High-Tech Plasma Processes Conference (HTPP15), 2018-07-02 - 2018-07-06 (2018-07-06, Toulouse)

Lightning arc interaction with complex structure

Espinosa Christine, Modèles numériques : outils d’expérimentation et d’exploration de la fragmentation et de la vulnérabilité de structures aérospatiales. 2018.

Modèles numériques : outils d'expérimentation et d'exploration de la fragmentation et de la vulnérabilité de structures aérospatiales

Lachaud Frédéric, Espinosa Christine, Michel Laurent, Rahmé Pierre, Piquet Robert, Modelling Strategies for Predicting the Residual Strength of Impacted Composite Aircraft Fuselages. 2015, Applied Composite Materials. 22 (6). 599-621. ISSN 0929-189X

Modelling Strategies for Predicting the Residual Strength of Impacted Composite Aircraft Fuselages

Lachaud Frédéric, Espinosa Christine, Michel Laurent, Rahmé Pierre, Piquet Robert, Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates. 2015, Applied Composite Materials. 22 (4). 377-403. ISSN 0929-189X

Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates

Espinosa Christine, Lachaud Frédéric, Limido Jérôme, Lacome Jean-Luc, Bisson Antoine, Charlotte Miguel, Coupling continuous damage and debris fragmentation for energy absorption prediction by cfrp structures during crushing. 2015, Computational Particle Mechanics. 2 (1). 1-17. ISSN 2196-4378

Coupling continuous damage and debris fragmentation for energy absorption prediction by cfrp structures during crushing

Gontier Justine, Hervas Garcia Carlos, Bordeneuve-Guibé Joël, Espinosa Christine, CANSAT : Multiphysical experimental design of a probe come-back mission. 2013, 64th IAC - International Astronautical Congress, 2013-09-23 - 2013-09-27 (2013-09-27, Beijing)

CANSAT: Multiphysical experimental design of a probe come-back mission

Vergnes Vivian, Chieragatti Rémy, Mabru Catherine, Espinosa Christine, Suraratchai Monchai, Method for characterizing the endurance limit of a part from its surface profile. 2012, INPI. US 8082114 B2

Method for characterizing the endurance limit of a part from its surface profile

Limido Jérôme, Espinosa Christine, Salaün Michel, Mabru Catherine, Chieragatti Rémy, Lacome Jean-Luc, Metal cutting modelling SPH approach. 2011, International Journal of Machining and Machinability of Materials. 9 (3-4). 177-196. ISSN 1748-5711

Metal cutting modelling SPH approach

Coquet Yves, Bordeneuve Pascal, Capmas Guillaume, Espinosa Christine, Improvements in Fluid Structure Interaction simulations of LS-Dyna(r). 2011, 21st AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2011-05-23 - 2011-05-26 (2011-05-26, Dublin)

Improvements in Fluid Structure Interaction simulations of LS-Dyna(r)

Ilyas Muhammad, Espinosa Christine, Lachaud Frédéric, Michel Laurent, Salaün Michel, Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. 2010, Key Engineering Materials. 452-453 (2011). 369-372. ISSN 1013-9826

Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model

Ilyas Muhammad, Espinosa Christine, Lachaud Frédéric, Michel Laurent, Salaün Michel, Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. 2010, 9th International Conference on Fracture and Damage Mechanics, 2010-09-20 - 2010-09-22 (2010-09-22, Nagasaki)

Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model

Chieragatti Rémy, Espinosa Christine, Lacome Jean-Luc, Limido Jérôme, Mabru Catherine, Salaün Michel, Détermination d’un Kt local associé à la rugosité de surface ; influence sur la tenue en fatigue. 2010, 29èmes journées de printemps de la SF2M "Influence des procédés sur la tenue en fatigue, rôle des défauts"

Détermination d’un Kt local associé à la rugosité de surface ; influence sur la tenue en fatigue

Ilyas Muhammad, Limido Jérôme, Lachaud Frédéric, Espinosa Christine, Salaün Michel, Modélisation SPH 3D de l’impact basse vitesse sur plaque composite. 2010, 19ème Congrès Français de Mécanique, 2009-08-24 - 2009-08-28 (2009-08-28, Marseille)

Modélisation SPH 3D de l'impact basse vitesse sur plaque composite

Calamaz Madalina, Limido Jérôme, Nouari Mohammed, Espinosa Christine, Coupard D., Salaün Michel, Girot F., Chieragatti Rémy, Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials. 2009, International Journal of Refractory Metals & Hard Materials. 3 (3). 595-604. ISSN 0958-0611

Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials

Ilyas Muhammad, Espinosa Christine, Lachaud Frédéric, Salaün Michel, Dynamic delamination modeling using cohesive finite elements. 2009, 9th International DYMAT Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (DYMAT 2009), 2009-09-07 - 2009-09-11 (2009-09-11, Brussels)

Dynamic delamination modeling using cohesive finite elements

Ilyas Muhammad, Lachaud Frédéric, Espinosa Christine, Salaün Michel, Modélisation de délaminage dynamique des composites unidirectionnels par éléments cohésifs. 2009, 16èmes Journées Nationales sur les Composites

Modélisation de délaminage dynamique des composites unidirectionnels par éléments cohésifs

Lacome Jean-Luc, Limido Jérôme, Espinosa Christine, SPH formulation with Lagrangian Eulerian adaptive kernel. 2009, 4th International SPHERIC Workshop

SPH formulation with Lagrangian Eulerian adaptive kernel

Ilyas Muhammad, Lachaud Frédéric, Espinosa Christine, Michel Laurent, Salaün Michel, Modélisation en dynamique rapide du délaminage des composites à l’aide d’éléments finis cohésifs = Dynamic delamination modeling of unidirectional composites by cohesive finite elements. 2009, 16èmes Journées Nationales sur les Composites (JNC 16)

Modélisation en dynamique rapide du délaminage des composites à l’aide d’éléments finis cohésifs = Dynamic delamination modeling of unidirectional com

Ilyas Muhammad, Lachaud Frédéric, Espinosa Christine, Salaün Michel, Dynamic delamination of aeronautic structural composites by using cohesive finite elements. 2009, 17th International Conference on Composite Materials (ICCM-17), 2009-07-27 - 2009-07-31 (2009-07-31, Edinburgh)

Dynamic delamination of aeronautic structural composites by using cohesive finite elements

Ilyas Muhammad, Espinosa Christine, Lachaud Frédéric, Salaün Michel, Simulation of dynamic delamination and mode I energy dissipation. 2009, 7th European LS-DYNA Conference, 2009-05-14 - 2009-05-15 (2009-05-15, Salzburg)

Simulation of dynamic delamination and mode I energy dissipation

Limido Jérôme, Espinosa Christine, Salaün Michel, Lacome Jean-Luc, Mabru Catherine, Chieragatti Rémy, Metal cutting analysis : SPH approach. 2008, JSTMM’08

Metal cutting analysis : SPH approach

Espinosa Christine, Lacome Jean-Luc, Limido Jérôme, Salaün Michel, Mabru Catherine, Chieragatti Rémy, Modelling High Speed Machining with the SPH Method. 2008, 10th International LS-DYNA Users Conference, 2008-06-08 - 2008-06-10 (2008-06-10, Dearborn)

Modelling High Speed Machining with the SPH Method

Limido Jérôme, Espinosa Christine, Salaün Michel, Lacome Jean-Luc, SPH method applied to high speed cutting modelling. 2007, International Journal of Mechanical Sciences. 4 (7). 898-908. ISSN 0020-7403

SPH method applied to high speed cutting modelling

Limido Jérôme, Espinosa Christine, Salaün Michel, Mabru Catherine, Chieragatti Rémy, High speed machining modelling : SPH method capabilities. 2007, 4th Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) workshop, 2009-05-27 - 2009-05-29 (2009-05-29, Nantes)

High speed machining modelling : SPH method capabilities

Espinosa Christine, De Lassat De Pressigny Yves, Bordenave Pascal, Henke Luke, Fluid-structure interaction simulation of parachute dynamic behaviour. 2007, 19th AIAA - Aerodynamic Decelerator Systems Technology Conference and Seminar, 2007-05-21 - 2007-05-24 (2007-05-24, Williamsburg)

Fluid-structure interaction simulation of parachute dynamic behaviour

Limido Jérôme, Suraratchai Monchai, Mabru Catherine, Espinosa Christine, Salaün Michel, Chieragatti Rémy, Machining parameters effects on fatigue life of aluminium alloy aeronautical parts. 2007, Fatigue Design 2007 : International Conference on the respective input of the numerical simulation and the experimental approach in fatigue design, 2007-11-21

Machining parameters effects on fatigue life of aluminium alloy aeronautical parts

Limido Jérôme, Espinosa Christine, Salaün Michel, Modélisation 3D des efforts de coupe et de la surface en UGV à partir d’un modèle numérique 2D. 2007, 8ème colloque national en Calcul des Structures

Modélisation 3D des efforts de coupe et de la surface en UGV à partir d'un modèle numérique 2D

Limido Jérôme, Suraratchai Monchai, Mabru Catherine, Espinosa Christine, Salaün Michel, Chieragatti Rémy, Effet des paramètres d’usinage sur la durée de vie en fatigue des pièces aéronautiques en alliages d’aluminium de la série 7000. 2007, MECAMAT Aussois 2007 : colloque national sur la fatigue des matériaux et des structures, 2007-01-22 - 2007-01-26 (2007-01-26, Aussois)

Effet des paramètres d'usinage sur la durée de vie en fatigue des pièces aéronautiques en alliages d'aluminium de la série 7000

Salaün Michel, Espinosa Christine, Pour un usage raisonné des logiciels de calcul et des bibliothèques scientifiques : Encyclopédie de l’Informatique et des Systèmes d’information. 2006« In :» Encyclopédie de l’Informatique et des Systèmes d’information. 2-7117-4846-4

Pour un usage raisonné des logiciels de calcul et des bibliothèques scientifiques : Encyclopédie de l'Informatique et des Systèmes d'information