A total of 89 scientific publications.
Some issues of listed references below can be found on :
- OATAO (Open Archive Toulouse Archive Ouverte)
- Open Science ISAE-SUPAERO
- HAL/ICA
THESIS [TH] : 3
Paroissien, E., 2020. Modélisation simplifiée des transferts d’efforts dans les assemblages boulonnés et/ou collés. Mémoire d’Habilitation à Diriger des Recherches, Université de Toulouse III Paul Sabatier (FR).
oatao
Paroissien, E., 2006. Contribution aux Assemblages Hybrides (Boulonnés/Collés) – Application aux Jonctions Aéronautiques. PhD Thesis, Université de Toulouse III Paul Sabatier (FR)
oatao
Paroissien, E., 2003. Reprise Hydrique des Matériaux Composites Carbone Epoxy (IM7/977-2). Master Thesis, EADS CRC and ENSICA, September 2003.
BOOK SECTION [OSC] : 5
Paroissien, E., Schwartz, S., Lachaud, F., 2023. Solutions analytiques pour l’assemblage collé en simple cisaillement. Techniques de l’Ingénieur, TRP 4038.
doi : 10.51257/a-v1-trp4038
open science
GitHub
Binder
English version
Pichon G., Daidié, A., Paroissien, E, Benaben, A., Chirol, C., 2023. Experimental and numerical investigations of mechanical behaviour for titanium bolted joints with friction shim. In : S. Gerbino, A. Lanzotti, M. Martorelli, R.M. Buil, C. Rizzi, L. Roucoules (Eds.), Advances on Mechanics, Design Engineering and Manufacturing IV (pp. 827-838).Dordrecht, The Netherlands : Springer.
doi : 10.1007/978-3-031-15928-2_72
hal
Paroissien, E., Lachaud, F., 2022. Modélisation simplifiée de structures planes élancées collées. Techniques de l’Ingénieur, TRP 4037.
doi : 10.51257/a-v1-trp4037
oatao
English version
Paroissien, E., Lachaud, F., Jacobs, T., 2013. A Simplified Stress Analysis of Bonded Joints using Macro-Elements. In S. Kumar, & K.L. Mittal (Eds.), Advances in modeling and design of adhesively bonded systems (chapter 4, pp. 93-146). Beverly (MA) : Wiley-Scrivener.
doi : 10.1002/9781118753682.ch4
oatao
Paroissien, E., Sartor, M., Huet, J., 2007. Hybrid (Bolted/Bonded) Joints Applied to Aeronautic Parts : Analytical One-Dimensional Models of a Single-Lap Joint. In S. Tichkiewitch, M. Tollenaere, & P. Ray (Eds.), Advanced in integrated design and manufacturing in mechanical engineering II (pp. 95-110). Dordrecht, The Netherlands : Springer.
doi : 10.1007/978-1-4020-6761-7_7
oatao
ARTICLE [ACL] : 32
Birro, T., Paroissien, E., Aufray, M., Lachaud, F., 2024. Analytical solution for the interfacial stress and energy release rate at failure initiation of the three-point bending test (ISO 14679:1997). Journal of Adhesion Science and Technology, xxx, xxxxxx.
doi : 10.1080/01694243.2024.2359264
Planas Andrés, M., Paroissien, E., Lachaud, F., Gérard, P., 2024. A finite-thickness rate-dependent cohesive zone model. Engineering Fracture Mechanics, 302, 110076.
doi : 10.1016/j.engfracmech.2024.110076
open science
Orsatelli, J.B., Paroissien, E., Lachaud, F., Schwartz, S., 2024. Influence of modelling hypotheses on strength assessment of CFRP stepped repairs. International Journal of Adhesion and Adhesives, 132, 103682.
doi : 10.1016/j.ijadhadh.2024.103682
hal
open science
To, M.N., Paroissien, E., Nassiet, V., Hassoune, B., Aufray, M., Welemane, H., 2024. Load transfer distribution in bolted-sealed joints. The Journal of Adhesion, xx,xxx.
doi : 10.1080/00218464.2024.2303455
open science
Schwartz, S., Paroissien, E., Lachaud, F., 2024. An enriched finite element for the simplified stress analysis of an entire bonded overlap : continuum macro-element. International Journal of Adhesion and Adhesives, 129, 103571.
doi : 10.1016/j.ijadhadh.2023.103571
open science
Salaün, M., Paroissien, E., Schwartz, S., Vu, T.L., De Angelis, V., Luyat, M., Ordonneau, B., 2023. Formulation methodologies based on Taylor expansion power and Fourier expansion series for the macro-element resolution scheme of enriched models for the stress analysis of adhesively bonded joints. International Journal for Numerical Modelling in Engineering, 124(20), 4547-4579.
doi : 10.1002/nme.7324
hal
Orsatelli, J.B., Paroissien, E., Lachaud, F.., Schwartz, S., 2023. Bonded flush repairs for aerospace composite structures : a review on modelling strategies and application to repairs optimization, reliability and durability. Composite Structures, 304, 116338.
doi : 10.1016/j.compstruct.2022.116338
hal
Pichon, G., Daidié, A., Paroissien, E., Benaben, A., 2023. Quasi-static strength and fatigue life of aerospace hole-to-hole bolted joints. Engineering Failure Analysis, 143, Part A, 106860.
doi : 10.1016/j.engfailanal.2022.106860
hal
Ordonneau, B., Paroissien, E., Salaün, M., Benitez-Martin, A., Schwartz, S., Malrieu, J., Guige, A., 2022. A simplified modal analysis of a single lap bonded joint using the macro-element technique. International Journal of Solids and Structures, 249, 111631.
doi : 10.1016/j.ijsolstr.2022.111631
oatao
Paroissien, E., Lachaud, F., Schwartz, S., 2022. Modelling load transfer in single-lap adhesively bonded and hybrid (bolted / bonded) joints. Progress in Aerospace Sciences, 130, 100811.
doi : 10.1016/j.paerosci.2022.100811
oatao
Birro, T., Paroissien, E., Lachaud, F., Aufray, M., 2022. On the effect of roughness parameters on adherence using the three-point bending test (ISO14679:1997). The Journal of Adhesion, 99(3), 492-517.
doi : 10.1080/00218464.2021.2024808
oatao
Silva, L.A., Espinosa, C., Paroissien, E., Lachaud, F., da Silva, L.F.M., 2021. Numerical simulations of adhesive spreading
during bonding-induced squeeze. The Journal of Adhesion, 98(16), 2517-2549.
doi : 10.1080/00218464.2021.1982388
oatao
Birro, T., Aufray, M., Paroissien, E., Lachaud, F., 2021. Assessment of interface failure behaviour for brittle adhesive using the three-point bending test. International Journal of Adhesion and Adhesives, 102, 102891
doi : 10.1016/j.ijadhadh.2021.102891
oatao
Torrelli, V., Paroissien, E., 2020. Simplified stress analysis of multilayered bonded structure under 1D-bar kinematics. Composite Structures, 112, 112641.
doi : 10.1016/j.compstruct.2020.112641
oatao
Birro, T., Paroissien, E., Aufray, M., Lachaud, F., 2020. A methodology based on the coupled criterion for the assessment of adhesive-to-adherend interface crack initiation. International Journal of Adhesion and Adhesives, 102664.
doi : 10.1016/j.ijadhadh.2020.102664
oatao
Montagne, B., Lachaud, F., Paroissien, E., Martini, D., Congourdeau, F., 2020. Failure analysis of single lap composite laminate bolted joints : comparison of experimental and numerical tests. Composite Structures, 238, 111949.
doi : 10.1016/j.compstruct.2020.111897
oatao
Lachaud, F., Paroissien, E., Michel, L., 2020. Validation of a simplified analysis for the simulation of delamination of CFRP composite laminated materials under pure mode I. Composite Structures, 237, 111897.
doi : 10.1016/j.compstruct.2020.111897
oatao
Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., 2020. Mode I cohesive zone model parameters identification and comparison of measurement techniques based on uncertainty estimation. International Journal of Solids and Structures, 191-192, 577-587.
doi : 10.1016/j.ijsolstr.2019.12.014
oatao
Ordonneau, B., Paroissien, E., Salaün, M., Malrieu, J., Guigue, A., Schwartz, S., 2020. A methodology for the computation of the macro-element stiffness matrix for the stress analysis of a lap joint with functionally graded adhesive properties. International Journal of Adhesion and Adhesives, 97, 102505.
doi : 10.1016/j.ijadhadh.2019.102505
oatao
Sekmen, K., Paroissien, E., Lachaud, F., 2020. Simplified stress analysis of multilayered adhesively bonded structures. International Journal of Adhesion and Adhesives, 97, 102497.
doi : 10.1016/j.ijadhadh.2019.102497
oatao
Jaillon, A., Jumel, J., Paroissien, E., Lachaud, F., 2020. Mode I cohesive zone model parameters identification and comparison of measurement techniques for robustness to the law shape evaluation., The Journal of Adhesion, 96:1-4, 272-299.
doi : 10.1080/00218464.2019.1669450
oatao
Paroissien, E., Lachaud, F., 2019. On the potential static strength of hybrid (bolted/bonded) lap joints with functionally graded adhesives. AIAA Journal, 57 (9), 4093-4103
doi : 10.2514/1.J058372
oatao
Schwartz, S., Paroissien, E., Lachaud, F., 2019. General formulation of macro-elements for the simulation of multi-layered bonded structures. The Journal of Adhesion, 96, 602-632.
doi : 10.1080/00218464.2019.1622420
oatao
Paroissien, E., Lachaud, F., da Silva, L.F.M., Seddiki, S., 2019. A comparison between macro-element and finite element solutions for the stress analysis of functionally graded single-lap joints. Composite Structures, 215, 331-350.
doi : 10.1016/j.compstruct.2019.02.070
oatao
Lélias, G., Paroissien, E., Lachaud, F., Morlier, J., 2019. Experimental Characterization of Cohesive Zone Models for Thin Adhesive Layers Loaded in Mode I, Mode II, and Mixed-Mode I/II by the use of a Direct Method. International Journal of Solids and Structures, 158, 90-115.
doi : 10.1016/j.ijsolstr.2018.09.005
oatao
Paroissien, E., da Silva, L.F.M., Lachaud, F., 2018. Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads. Composite Structures, 203, 85-100.
doi : 10.1016/j.compstruct.2018.07.015
oatao
Paroissien, E., Lachaud, F., Morlier, J., Schwartz, S., 2018. A direct method for the assessment of cohesive zone models for thin adhesive layers loaded in mode I, mode II, and mixed-mode I/II. Reviews of Adhesion and Adhesives.
doi : 10.7569/RAA.2018.097301
oatao
Paroissien, E., Lachaud, F., Schwartz, S., Da Veiga, A., Barrière, P., 2017. Simplified stress analysis of hybrid (bolted/bonded) joints. International Journal of Adhesion and Adhesives, 77, 183-197.
doi : 10.1016/j.ijadhadh.2017.05.003
oatao
Lélias, G., Paroissien, E., Lachaud, F., Morlier, J., Schwartz, S., Gavoille, C., 2015. An extended semi-analytical formulation for fast and reliable stress analysis of adhesively bonded joints. International Journal of Solids and Structures, 62, 18-39.
doi : 10.1016/j.ijsolstr.2014.12.027
oatao
Paroissien, E., Gaubert, F., Da Veiga, A., Lachaud, F., 2013. Elasto-plastic analysis of bonded joints with macro-elements. Journal of Adhesion Science and Technology, 27 (13), 1464-1498.
doi : 10.1080/01694243.2012.745053
oatao
Hoang-Ngoc, C.T., Paroissien, E., 2010. Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive. International Journal of Adhesion and Adhesives, 30 (3), 117-129.
doi : 10.1016/j.ijadhadh.2009.12.002
oatao
Paroissien, E., Sartor, M., Huet, J., Lachaud, F., 2007. Analytical two-dimensional model of a hybrid (bolted/bonded) single-lap joint. Journal of Aircraft, AIAA, ISSN 0021-8669, 44 (2), 573-582.
doi : 10.2514/1.24452
oatao
CONFERENCE PAPER [ACT] : 16
Camberlin, E., Benani, L., Charlotte, M., Paroissien, E., Salaün, M., 2024. A Liquid-Solid Thermo-Mechanical Phase-Field Fracture Model for Electrothermal Wing De-Icing System. AiAA-2024-4071, AIAA Aviation Forum 2024, 29 July – 2 August, Las Vegas (NV).
Pichon, G., Méouchy, L., Daidie, A., Paroissien, E., Benaben, A., 2022. Etude numérique du comportement mécanique d’assemblage hole-to-hole sous sollicitation quasi statique. 25ème Congrès Français de Mécanique, 28 August – 2 September, Nantes (FR).
hal
Lachaud, F., Hor, A., Paroissien, E, 2022. Réparation des pièces aéronautiques de haute valeur ajoutée. Les entretiens de Toulouse, 15ème édition, 12–13 April 2022, Toulouse (FR).
Pichon, G., Daidié, A., Paroissien, E., Benaben, A., 2021. Influence des jeux et des désalignements sur un assemblage simple cisaillement. Assemblage Hole to Hole d’une structure aéronautique. Proceedings of 17ème Colloque S-mart, 31 March – 2 April 2021.
hal
Montagne, B., Lachaud, F., Paroissien, E., Martini, D., Congourdeau, F., 2019. Nonlinear finite element analysis of composite bolted lap-joints : experimental vs. numerical tests. Proceedings of 22nd Conference on Composite Materials (ICCM 22), 11-16 August 2019, Melbourne (AU).
oatao
Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., 2019. Cohesive zone model identification on mode I bonded assembly : sensitivity analysis. Proceedings of 22nd Conference on Composite Materials (ICCM 22), 11-16 August 2019, Melbourne (AU).
oatao
Montagne, B., Lachaud, F., Paroissien, E., Martini, D., Congourdeau, F., Dragon-Louiset, M., 2019. Analyse non linéaire par éléments finis d’assemblages composites boulonnés : comparaison essais-calculs. Proceedings of 21st Journées Nationales Composites (JNC 21), 1-3 July 2019, Bordeaux (FR).
oatao
Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., 2019. Identification des modèles de zones cohésives en mode I pour des assemblages composites collés : état de l’art et analyse de sensibilité. Proceedings of 21st Journées Nationales Composites (JNC 21), 1-3 July 2019, Bordeaux (FR).
oatao
Montagne, B., Lachaud, F., Paroissien, E., Martini, D., 2018. Analyzing the failure of composite bolted joints : Experimental results and 2D analysis. Proceedings of 18th European Conference on Composite Materials (ECCM 2018), 25-28 June 2018, Athens (GR).
oatao
Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., Renart, J., 2018. Thickness influence on a structural methacrylate adhesive behavior. Proceedings of 6th World Congress on Adhesion and Related Phenomena (WCARP 2018), 25 February – 2 March 2018, San Diego (CA).
oatao
Paroissien, E., Da Veiga, A., Laborde, A., 2011. An 1D-beam approach for stress analysis and fatigue life prediction of bonded joints. 26th International Committee on Aeronautical Fatigue (ICAF 2011), 1–3 June 2011, Montréal, CN, Book of Proceedings, Springer Eds., ISBN 978-94-007-1663-6, pp. 359-374.
doi : 10.1007/978-94-007-1664-3_29
oatao
Paroissien, E., Hoang-Ngoc, C.T., Bhugaloo, H., Ducher, D., 2009. Improving the fatigue life of single-lap bolted joints thanks to the hybrid (bolted/bonded) joining technology. 25th International Committee on Aeronautical Fatigue (ICAF 2009), 27-29 May 2009, Rotterdam, NL, Book of Proceedings, Springer Eds., ISBN 978-90-481-2745-0, pp. 475-492.
doi : 10.1007/978-90-481-2746-7_27
oatao
Paroissien, E., Sartor, M., Huet, J., 2006. Hybrid (bolted/bonded) joints applied to aeronautic parts : Analytical one-dimensional models of a single-lap joint. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (6th IDMME), AFM, 17-19 May 2006, Grenoble (FR), proceeding on CD-ROM, ISBN 2-9523979-1-0, paper No. 34.
oatao
Paroissien, E., Sartor, M., Huet, J., Lachaud, F., 2006. Hybrid (bolted/bonded) joints applied to aeronautic parts : Analytical two-dimensional model of a hybrid (bolted/bonded) single-lap joint. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference (47th SDM AIAA), 1-4 May 2006, Newport (RI), paper AIAA-2006-2268.
doi : 10.2514/6.2006-2268
oatao
Paroissien, E., Sartor, M., Huet, J., 2005. Contribution aux assemblages hybrides (boulonnés/collés) aéronautiques : modèle analytique monodimensionnel. 17ème Congrès Français de Mécanique (17ème CFM), AFM, Proceeding on CD-ROM, Paper No. 162, 30 August - 3 September 2005, Troyes (FR).
oatao
Didierjean, S., Michel, L., Barrau, J.J., Paroissien, E., 2003. Predicting the behavior of graphite/epoxy laminates under hydrothermal loads. EUROMECH 453, December 2003, Saint-Etienne (FR).
oatao
INVITED CONFERENCE [INV] : 1
Paroissien, E., Gourinat, Y., 2018. Stratégie de modélisation avancée des assemblages structuraux aérospatiaux. Matériaux, interfaces, fatigue, dynamique. Journée scientifique 3AF & Onera Assemblages innovants : de l’élaboration matérielle à la modélisation structurale, Invited keynote lecture, 13 June 2018, Châtillon (FR).
oatao
CONFERENCE (without paper) [COM] : 19
To, M.N., Paroissien, E., Lachaud, F., Nassiet, V., Hassoune, B., Aufray, M., Welemane, H., 2023. Correlation between experiments and numerical simulation in modelling visco-hyperelasticity of aeronautical sealant in pure bonded and hybrid bolted/bonded joints. 14th European Adhesion Conference & 7th World Congress on Adhesion and Related Phenomena (EURADH & WCARP 2023), 10-13 September 2023, Garmisch-Partenkirchen (DE).
open science
Planas Andrés, M., Paroissien, E., Lachaud, F., Gérard, P., 2023. Experimental and numerical validation of a new finite thickness/width rate-dependent cohesive zone model. 14th European Adhesion Conference & 7th World Congress on Adhesion and Related Phenomena (EURADH & WCARP 2023), 10-13 September 2023, Garmisch-Partenkirchen (DE).
open science
Birro, T., Paroissien, E., Aufray, M., 2023. Assessment of adhesive failure properties for the three-point bending test using an analytical approach. 14th European Adhesion Conference & 7th World Congress on Adhesion and Related Phenomena, 10-13 September 2023 (EURADH & WCARP 2023), Garmisch-Partenkirchen (DE).
open science
Orsatelli, J.B., Paroissien, E., Lachaud, F., Schwartz, S., 2023. On the influence of modelling hypotheses on strength prediction of CFRP stepped repair. 7th International Conference on Structural Adhesive Bonding Conference (AB2023), 13-14 July 2023, Porto (PT).
open science
Planas Andrés, M., Paroissien, E., Lachaud, F., 2023. A new finite thickness/width rate-dependent cohesive zone model. 7th International Conference on Structural Adhesive Bonding Conference (AB2023), 13-14 July 2023, Porto (PT).
open science
Orsatelli, J.B., Paroissien, E., Lachaud, F., Schwartz, S., 2023. Dimensionnement simplifié de réparations composites collées en stepping : une étude comparative de modèles semi-analytiques et numériques. 5th Colloque Assemblages Mécaniques, 16-17 July 2023, ISAE-SUPMECA, Saint-Ouen (FR).
open science
Silva, L., Espinosa, C., Paroissien, E., Lachaud, F., da Silva, L.F.M., 2022. Numerical model of the variability of particulate filled structural adhesive behaviour and failure in tension. 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2022), 5-9 June 2022, Olso (NO).
open science
Pichon G., Daidié, A., Paroissien, E, Benaben, A., Chirol, C., 2022. Experimental and numerical investigations of mechanical behaviour for titanium bolted joints with friction shim. Proceedings of International Joint Conference on Mechanics, Design and Advanced Manufacturing (JCM2022), 1–3 June 2022, Ischia (IT).
Paroissien, E., Lachaud, F., 2021. Modélisation des transferts d’effort au travers d’une interface adhésive. Symposium Adhésion : Expérience, théorie et applications, 30 Novembre 2021, Palaiseau (FR).
open science
To,M.N., Paroissien, E., Lachaud, F., Nassiet, V., Hassoune, B., Aufray, M., Welemane, H., Silva, L.A., Béchot, O.S., 2021. Preliminary assessment of the fatigue strength of hybrid (bolted/bonded) joints as a function of the visco-elastic properties of the adhesive layer. 13th European Adhesion Conference (EURADH 2021), 10-14 October 2021, Antibes (FR).
oatao
Silva, L.A., Espinosa, C., da Silva, L.F.M., Paroissien, E., Lachaud, F., 2019. Simulation of adhesive squeeze flow using smoothed particle hydrodynamics. Computational Methods in Multi-Scale, Multi-Uncertainty and Multi-Physisc Problems (CM4P - Eccomas Thematic Conference), 15-17 July 2019, Porto (PT).
open science
Silva, L.A., Espinosa, C., da Silva, L.F.M., Paroissien, E., Lachaud, F., 2019. Numerical simulations of adhesive squeeze flow : a review. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).
open science
Sekmen, K., Paroissien, E., Lachaud, F., 2019. Simplified Stress Analysis of Multilayered Adhesively Bonded Metallic Structures. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).
open science
hal
Ordonneau, B., Paroissien, E., Salaün, M., Malrieu, J., Guigue, A., Schwartz, S., 2019. A methodology for the approached formulation of a macro-element for the simulation of bonded overlap with graded properties. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).
open science
Jaillon A., Jumel, J., Paroissien, E., Lachaud, F., 2019. Cohesive zone model identification in mode I : parameters sensitivity. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).
open science
Birro T.V., Paroissien, E., Aufray, M., Lachaud, F., 2019. Adhesive failure characterization using Coupled Criterion and Cohesive Zone Modeling. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).
open science
Birro, T.V., Paroissien, E., Aufray, M., Lachaud, F., 2018. Prediction of adhesion failure of bonded joints using 3-point bending test and stress-energy coupled criterion. Proceedings of 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), 28-31 August September 2018, Tarbes (FR).
oatao
Paroissien, E., Da Veiga, A., Schwartz, S., Lélias, G., Lachaud, F., 2015. Modélisation simplifiée de liaisons collées à l’aide de la technique par macro-élément. Revue des développements réalisés depuis 2004. Forum TERACTEC, 24 June 2015, Ecole Polytechnique, Palaiseau (FR).
oatao
Lachaud, F., Piquet, R., Paroissien, E., Huet, J., 2013. Approche couplée essais-calculs pour l’analyse du comportement des assemblages boulonnés en composites stratifiés. NAFEMS, 30 May 2013, Noisy-le-Grand (FR).
oatao
CONFERENCE POSTER [AFF] : 8
Planas-Andres, M., Paroissien, E., Lachaud, F., 2022. Caractérisation expérimentale du comportement mécanique des assemblages collés dans des pales d’éoliennes fabriquées à partir de la résine thermoplastique ELIUM. JADH2022, 18-23 September 2022, La Turbale (FR).
open science
Orsatelli, J.B., Paroissien, E., Lachaud, F., Schwartz, S., 2022. Réparations collées à fleur pour les structures composites aéronautiques : une revue des approches de modélisation et applications au dimensionnement fiable et optimal. JADH2022, 18-23 September 2022, La Turbale (FR).
open science
Leplat, J., Paroissien, E., Lachaud, F., Michel, L., 2022. Conséquence des lois de traction-séparation d’une formulation CZM sur les paramètres de rupture en mode I. JADH2022, 18-23 September 2022, La Turbale (FR).
open science
Pichon, G., Daidié, A., Paroissien, E., Benaben, A., Chirol, C., 2021. Hole-to-hole assembly on aeronautical structures. 2nd International Conference on Advanced Joining Processes 2021 (AJP2021), 21-22 October 2021, Sintra (PT).
open science
Jaillon, A., Lachaud, F., Paroissien, E., Jumel, J., 2019. Modélisations numériques de joints de colle épais en mode I. JADH2019, 2-6 December 2019, Annecy (FR).
open science
Ordonneau, B., Paroissien, E., Salaün, M., Malrieu, J., Guigue, A., Schwartz, S., 2019. Analyse simplifiée du comportement mécanique des joints collés à gradient de propriétés. JADH2019, 2-6 December 2019, Annecy (FR).
open science
Birro, T.V., Paroissien, E., Aufray, M., Lachuad, F., 2018. Prediction of adhesion failure of bonded joints using 3-point bending test and stress-energy coupled criterion. Proceedings of 12th European Adhesion Conference (EURADH 2018), 5-7 September 2018, Lisbon (PT).
oatao link
Aufray, M., Paroissien, E., Sauvage, J.B., Poquillon, D., Lachaud, F., 2017. Modélisation numérique et expérimentale de l’essai de flexion trois points. JADH2017, 11-13 October 2017, Sainte-Maxime (FR).
oatao
OTHER PUBLICATION [AP] : 5
Silva, L.A., Espinosa, C., da Silva, L.F.M., Paroissien, E., Lachaud, F., Sanches, L., 2019. Simulating the squeeze flow of a technical adhesive to contribute to a demise design. CNES COMET Animation “Design for Demise”, 3 October 2019, CNES, Toulouse (FR)
Paroissien, E., Campassens, D., 2011. Stress analysis support to structural sealant development. 14th Numerical Simulation Meeting, HUTCHINSON, 16 June 2011, Abbaye des Vaux de Cernay (FR).
Hoang-Ngoc, C.T., Paroissien, E., 2009. Modélisation par la méthode des éléments finis d’assemblages collés à l’aide d’adhésifs flexibles – Application à la modélisation d’assemblages hybrides (boulonnés/collés) aéronautiques. Technical Presentation, SAMTECH Workshop on Non Linear Simulation, 29 January 2009, Seilh (FR).
Paroissien, E., 2007. Contribution aux assemblages hybrides (boulonnés/collés) – Application aux jonctions aéronautiques. Technical Presentation, Journée « Collage – Caractérisation et Applications », CCT CNES, 8 March 2007, Toulouse (FR).
Chieragatti, R., Paroissien, E., Huet, J., 2004. Faisabilité d’assemblages mixtes boulonnés-collés en aéronautique. CETIM, 21 September 2004, Saint-Étienne (FR).
oatao